Polishing of wall and ceiling surfaces

Polishing of surfaces painted with lime wall paints

Remove old paint applications entirely by grinding or scraping and then remove all dust from the substrate (if possible, wash it with a wet cloth or sponge). Use JUBOLIN or NIVELIN (manual application) or JUBOLIN P-25 (machine or manual application) for polishing.                                                                                                    

Cover the clean substrate with diluted ACRYL EMULSION (ACRYL EMULSION : water = 1 : 1). Apply levelling compound manually using a stainless steel smoothing trowel (JUBOLIN or JUBOLIN P-25 or NIVELIN) or using a machine (by spraying; JUBOLIN P-25) onto a dry primer, usually in two, but if necessary, in more coats in thickness of 1 to 2 mm. Regardless of the manner of application, remove excess compound from the treated surface using a stainless steel smoothing trowel, while trying to smooth the surface as much as possible. Sand the first coat with sandpaper prior to the application of the second one, and the same with the second or the final coat. Grinding can be either manual or performed by a machine.

to polish a m² of medium rough surface, you will need ~1.5 to 2 kilos of  JUBOLIN
(manual application) or JUBOLIN P-25 (manual or machine application)or ~1 to 1.5 kilo of NIVELIN (manual application) and ~0.1 kilo of  AKRIL EMULSION