First painting of wall and ceiling surfaces

Painted surfaces should be washable or resistant to wiping with a wet cloth

a) primer:

solution A

Prior to applying JUPOL GOLD, JUPOL TREND, JUPOL JUNIOR, JUPOL BRILJANT, JUPOL LATEX MATT, JUPOL LATEX SEMI-GLOSS and JUPOL LATEX SATIN

Not necessary!                                                                 

solution B – prior to applying JUPOL SILIKAT                                                                    

Coat clean lime and lime-cement renders with diluted JUBOSIL GF (JUBOSIL GF : water = 1 : 1).

to prepare a m² of normally absorbing and very rough lime or lime-cement surface, you will need ~150 ml of JUBOSIL GF.

b) painting:

solution A            
painting with interior dispersion paint JUPOL GOLD (painted surfaces are resistant to gentle wiping with a wet cloth or sponge and are not glossy; you can select among intensive colour shades; this paint is suitable for accommodation, business and other premises).
                      
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 10% of water; tinting is possible on JUMIX tinting stations; on a construction site it is tinted up to pastel shades with UNITON or DIPI CONCENTRATE).

to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL GOLD.

solution B                                                                                                                  
painting with interior dispersion paint JUPOL TREND (painted surfaces are washable and have no gloss; you can select among nine modern colour shades; this paint is suitable for accommodation, business and other premises). 

Paint is applied onto a dry primer using a short-bristle painting roller (the use of JUPOL TREND roller is recommended) in two coats (paint is scooped with a roller directly from the original container; do not use a bucket grid).

to paint a m² of a normally absorbing and very rough surface (a two-coat application), you will need ~125 ml of JUPOL TREND
.

solution C                        
painting with interior dispersion paint JUPOL JUNIOR (painted surfaces are washable and have no gloss; it is possible to select among six modern colour shades; this paint is suitable for children’s rooms and other accommodation, business and other premises).

Paint is applied onto a dry primer using a short-bristle painting roller (the use of JUPOL TREND roller is recommended) in two coats (paint is scooped with a roller directly from the original container; do not use a bucket grid).

to paint a m² of a normally absorbing and very rough surface (a two-coat application), you will need ~125 ml of JUPOL JUNIOR.

solution D                                                                                                                                
painting with interior dispersion paint JUPOL BRILJANT (painted surfaces are washable, have no gloss and  smell gently like mint immediately after painting; it is possible to select among intensive colour shades; this paint is suitable for accommodation, business and other premises).

Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations. 

to paint a m² of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL BRILJANT
.

solution E                                                                                   
painting with latex paint JUPOL LATEX MATT (painted surfaces have no gloss, are washable and resistant to medical cleaning agents and disinfectants; it is also possible to select among intensive colour shades; the coat has a small active surface and is thus suitable also for premises with higher hygiene and technical requirements – outpatient clinics, hospitals, and similar)

Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations.

to paint a m² of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL LATEX MATT.

                                                                                                                                               
solution F                                                                                                                                  
painting with a latex paint JUPOL LATEX SEMI-GLOSS (painted surfaces have gentle gloss, are washable and resistant to medical cleaning agents and disinfectants; it is also possible to select among intensive colour shades; the coat has a very small active surface and is thus suitable also for premises with higher hygiene and technical requirements – outpatient clinics, hospitals, and similar).

Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations. 

to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL SEMI-GLOSS.
                                                                                                                               
solution G                                                                                                                                   
painting with latex paint JUPOL LATEX SATIN (painted surfaces have a silky gloss, are washable and resistant to medical cleaning agents and disinfectants; it is also possible to select among intensive colour shades; the coat has a very small active surface and is thus suitable also for premises with higher hygiene and technical requirements – outpatient clinics, hospitals, and similar). 
                            
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations. 

to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL LATEX SATIN.

solution H                                                                                                                             
painting with silicate interior wall paint JUPOL SILIKAT (this paint is suitable for buildings of architectural heritage; painted surfaces are washable and have no gloss; it is also possible to choose among intensive colour shades; appearance of painted surfaces is similar to surfaces painted with lime paints).
                                                                                                                     
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations. 

to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~220 ml of JUPOL SILIKAT.