Fine plastered surfaces and surfaces of gypsum-cardboard linings, which have not been additionally smoothed prior to painting
Painted surfaces should be washable or resistant to wiping with a wet cloth
a) a primer:
solution A
Prior to applying JUPOL GOLD, JUPOL TREND, JUPOL JUNIOR, JUPOL BRILJANT, JUPOL LATEX MATT, JUPOL LATEX SEMI-GLOSS and JUPOL LATEX SATIN
Coat the cleaned substrate with diluted ACRYL EMULSION (ACRYL EMULSION : water = 1 : 1), which is rather replaced by diluted deep impregnation agent JUKOL (JUKOL : water = 1 : 1) if you paint particle boards, fibre-cement and gypsum-cardboard boards of lesser quality.
to prepare a m2 of normally absorbing and very rough surface, you will need ~100 g of AKRIL EMULSION and ~100 ml of JUKOL for particle boards, fibre-cement boards and gypsum-cardboard boards of lesser quality.
solution B – prior to applying JUPOL SILIKAT
Coat clean lime and lime-cement renders with diluted JUBOSIL GX (JUBOSIL GX : water = 1 : 1), and other substrates with JUBOSIL GF (you can dilute it with up to 10% with water, depending on the absorbency of the substrate).
to prepare a m2 of normally absorbing and very rough lime or lime-cement surface, you will need ~100 ml of JUBOSIL GX, and ~150 ml of JUBOSIL GF for other substrates.
b) painting:
solution A
painting with interior dispersion paint JUPOL GOLD
(painted surfaces are resistant to gentle wiping with a wet cloth or sponge and are not glossy; you can select among intensive colour shades; this paint is suitable for accommodation, business and other premises).
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 10% of water; tinting is possible on JUMIX tinting stations; on a construction site it is tinted up to pastel shades with UNITON or DIPI CONCENTRATE).
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL GOLD.
solution B
painting with interior dispersion paint JUPOL TREND
(painted surfaces are washable and have no gloss; you can select among nine modern colour shades; this paint is suitable for accommodation, business and other premises).
Paint is applied onto a dry primer using a short-bristle painting roller (the use of JUPOL TREND roller is recommended) in two coats (paint is scooped with a roller directly from the original container; do not use a bucket grid).
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~250 ml of JUPOL TREND.
solution C
painting with interior dispersion paint JUPOL JUNIOR (painted surfaces are washable and have no gloss; it is possible to select among six modern colour shades; this paint is suitable for children’s rooms and other accommodation, business and other premises).
Paint is applied onto a dry primer using a short-bristle painting roller (the use of JUPOL TREND roller is recommended) in two coats (paint is scooped with a roller directly from the original container; do not use a bucket grid).
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~250 ml of JUPOL JUNIOR.
solution D
painting with interior dispersion paint JUPOL BRILJANT (painted surfaces are washable, have no gloss and smell gently like mint immediately after painting; it is possible to select among intensive colour shades; this paint is suitable for accommodation, business and other premises).
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations.
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL BRILJANT.
solution E
painting with latex paint JUPOL LATEX MATT (painted surfaces have no gloss, are washable and resistant to medical cleaning agents and disinfectants; it is also possible to select among intensive colour shades; the coat has a small active surface and is thus suitable also for premises with higher hygiene and technical requirements – outpatient clinics, hospitals, and similar)
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations.
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL LATEX MAT.
solution F
painting with a latex paint JUPOL LATEX SEMI-GLOSS (painted surfaces have gentle gloss, are washable and resistant to medical cleaning agents and disinfectants; it is also possible to select among intensive colour shades; the coat has a very small active surface and is thus suitable also for premises with higher hygiene and technical requirements – outpatient clinics, hospitals, and similar).
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations.
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL SEMI-GLOSS.
solution G
painting with latex paint JUPOL LATEX SATIN (painted surfaces have a silky gloss, are washable and resistant to medical cleaning agents and disinfectants; it is also possible to select among intensive colour shades; the coat has a very small active surface and is thus suitable also for premises with higher hygiene and technical requirements – outpatient clinics, hospitals, and similar).
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations.
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~190 ml of JUPOL LATEX SATIN.
solution H
painting with silicate interior wall paint JUPOL SILIKAT (this paint is suitable for buildings of architectural heritage; painted surfaces are washable and have no gloss; it is also possible to choose among intensive colour shades; appearance of painted surfaces is similar to surfaces painted with lime paints).
Paint is applied onto a dry primer using a long-bristle painting roller, a brush or it can be sprayed in two (if necessary, in three) coats (it is diluted with up to 5% of water; tinting is possible on JUMIX tinting stations.
to paint a m2 of a normally absorbing and very rough surface (a two-coat application), you will need ~220 ml of JUPOL SILIKAT.
In the area "My JUB", registered users will be able to add their own projects and favourite links as well as to edit their user account.
osnovni premazi TL (70.09 KB)jupol gold in jupol briljant TL (66.82 KB)jupol silikat TL (64.70 KB)jupol trend TL (68.80 KB)
jupol junior TL (361.98 KB)specialne notranje barve (66.82 KB)latex barve (66.46 KB)
