Façade surfaces infected by wall algae and mould

Restoring paint

Suitable paints for restoring paint are: 

• micro reinforced acrylic façade paint REVITALCOLOR AG (solution A); suitable for all types of decorative renders; it adheres to the substrate only by adhesion, you can select among a wide range of colour shades, it is easy to apply and suitable also for less favourable weather conditions; it is distinguished by high water repellence and resistance to infection with wall algae and mould
• micro reinforced silicone façade paint REVITALCOLOR SILICONE (solution B); suitable for all types of decorative renders; it adheres to the substrate only by adhesion, available in a limited selection of colour shades, it is easy to apply and suitable also for less favourable weather conditions; it is distinguished by high water repellence, which abates very slowly, and resistance to infection with wall algae and mould

Microfibres in both paints successfully prevent cracking of too-thick applications in furrows and holes of relief render surfaces.

Solution A:

Clean the surface off loose particles and cover it with diluted ACRYL EMULSION (ACRYL EMULSION : water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, coat it twice with a selected shade of  REVITALCOLOR AG. If necessary, dilute the paint with up to 10% of water.

To paint a m² of a façade surface, you will need ~100-150 g of AKRIL EMULSION
or ~100-150 ml of JUKOL and ~300 to 700 ml of REVITALCOLOR AG.
        
Solution B:

Clean the surface off loose particles and cover it with diluted JUBOSIL G (JUBOSIL G : water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, coat it twice with a selected shade of  REVITALCOLOR SILICONE. If necessary, dilute the paint with up to 10% of water.

To paint a m² of a façade surface, you will need ~100-150 ml of JUBOSIL G
or ~100-150 ml of JUKOL and ~300 to 700 ml of REVITALCOLOR SILICONE.Back