Restoring paint on decorative renders

Present renders have faded, are dirty, washed out, well adhered to the surface, but hair-cracked

• micro reinforced acrylic façade paint REVITALCOLOR AG (solution A); suitable for all types of decorative renders; it adheres to the substrate only by adhesion, you can select among a wide range of colour shades, it is easy to apply and suitable also for less favourable weather conditions; it is distinguished by high water repellence and resistance to infection with wall algae and mould
• micro reinforced silicone façade paint REVITALCOLOR SILICONE (solution B); suitable for all types of decorative renders; it adheres to the substrate only by adhesion, available in a limited selection of colour shades, it is easy to apply and suitable also for less favourable weather conditions; it is distinguished by high water repellence, which abates very slowly, and resistance to infection with wall algae and mould
• and micro reinforced silicate façade paint REVOTALCOLOR SI (solution C); suitable only for restoring paint on mineral and silicate decorative renders; available in a limited selection of colour shades, demanding to apply and can be applied only in favourable weather conditions

Microfibres in all three paints successfully prevent cracking of too-thick applications in furrows and holes of the relief surface of the render, and successfully bridge cracks together with fibres and sandy filling from the primer. 

Solution A

Clean the facade surface off dust and loose particles and paint it with diluted JUBOSIL EX and then, twice with REVITALCOLOR SILICONE in the selected colour shade (if necessary, dilute the paint with up to 10% of water)

To paint a m² of a façade surface, you will need: ~300 to 500 ml of JUBOSIL EX
and ~400 to 700 ml of REVITALCOLOR AG; even a small amount of JUBOSIL GX
is sufficient for potential diluting of JUBOSIL EX.

Solution B

Clean the facade surface off dust and loose particles and paint it with diluted JUBOSIL EX and then, twice with REVITALCOLOR AG in the selected colour shade (if necessary, dilute the paint with up to 10% of water).

To paint a m² of a façade surface, you will need: ~300 to 500 ml of JUBOSIL EX
and ~400 to 700 ml of REVITALCOLOR SILICONE; even a small amount of JUBOSIL GX is sufficient for potential diluting of JUBOSIL EX.

Solution C

Clean the facade surface off dust and loose particles and paint it with diluted JUBOSIL EX and then, twice with REVITALCOLOR SI in the selected colour shade (if necessary, dilute the paint with up to 10% of JUBOSIL GX).

To paint a m² of a façade surface, you will need: ~300 to 500 ml of  JUBOSIL EX
and ~400 to 700 ml of REVITALCOLOR SI; even a small amount of JUBOSIL GX
is sufficient for potential diluting of JUBOSIL EX.


Back