Decorative renders

KULIRPLAST 2.0

• decorative render made of natural marble grains
• wide selection of colour shades
• supplied in paste-like form, ready for application
• it is possible apply KULIRPLAST 2.0 to all kinds of fine plastered substrates including that of facade thermal insulating systems on thermal insulating lining made of expanded or extruded polystyrene
• due to its worse water-vapour permeability, it is impossible to be used as protection of thermal insulating renders and in façade thermal insulating systems, where insulating lining is made of mineral wool
• highly water-repellent, therefore, it is especially suitable for treatment of plinths

Coat the substrate with diluted ACRYL EMULSION first (ACRYL EMULSION : water = 1 : 1), and with diluted ACRYLCOLORJEM (ACRYLCOLOR : water = 1 : 1) for renders with prevailing light and translucent marble sands to avoid spots, or white UNIGRUND or, even better, with UNIGRUND in the colour as close to the prevailing colour shade of the render as possible. 

To ensure adhesion, coat extremely smooth surfaces and other problematic substrates with VEZAKRIL. Apply mortar compound in thickness of approximately 2 mm onto a dry pre-primer. Level the coating with a stainless steel trowel and smooth it to fill all empty spaces between sandy grains. When the coating does not appear “milky” anymore, level the surface once more.

In cases more than one container of KULIRPLAST 2.0 is needed to paint an individual wall surface, avoid irregular colouration due to eventual differences of colour shades by equalizing the paint in a large container of appropriate size. Perform equalization especially carefully when applying renders of different production batches onto the same wall.

There may be little discrepancies between the colour of delivered KULIRPLAST 2.0 and the colour of samples on colour charts due to different shades of the same marble grains belonging to different deliveries. Such discrepancies cannot be avoided and cannot be a reason of complaint.

Divide larger surfaces to several parts by means of suitably wide channels and finely polished stripes to avoid problems of application of the plaster onto larger wall surfaces and unaesthetic appearance due to potentially uneven substrate. Thus, interesting decorative effects can be achieved.

To process a m² of the surface, you will need ~70ml of ACRYL EMULSION or ~70ml of ACRYL COLOR or ~150-200g of UNIGRUND or ~300ml of VEZAKRIL and ~4.5 kg of KULIRPLAST 2.0.
Back