Smooth decorative renders

ACRYLIC SMOOTH RENDER 1.0, 1.5, 2.0 and 2.5

• typical evenly grained appearance
• four granulations: 1.0, 1.5, 2.0 and 2.5 mm
• widest selection of colour shades (ACRYLIC SMOOTH RENDER 1.5 and ACRYLIC SMOOTH RENDER 2.0 also in intensive colour shades, ACRYLIC SMOOTH RENDER 1.0 only in white)
• supplied in paste-like form, ready for application
• application to all kinds of fine plastered substrates including that of facade thermal insulating systems is possible (regardless of the type of insulating lining)
• (ATTENTION! Lower fire resistance of façade thermal insulating systems, where insulating lining is made of mineral wool.)
• ACRYLIC SMOOTH RENDER 1.0 is intended primarily for treatment of reveal surfaces, decorative mortar trims, cornices and other façade decorations; be careful about how well the surface is levelled when applying it to larger surfaces!
• highly water repellent
• the easiest way to achieve structural effects
• application is possible also in less favourable weather conditions

Coat the substrate with UNIGRUND or diluted ACRYLCOLOR (ACRYLCOLOR : water = 1 : 1); - in both cases, the shade should be in the shade as close to the colour of the render as possible. Apply mortar compound in thickness slightly above the diameter of the largest sand grain manually (using a stainless steel smoothing trowel) or using a machine (by spraying) onto a dry pre-coat. Smooth the compound by circular movements using a plastic smoothing trowel until an evenly grained surface is achieved. 

The joining of surfaces in corner edges is facilitated by installing finely smoothed stripes which have got a width of only a few centimetres. Such stripes are recommended also when dividing big façade boards to several smaller ones to avoid any trouble at application of the render and unaesthetic appearance due to a surface, which may not be even enough, and, at the same time, by applying the stripes interesting decorative effects can be achieved.

To process a m² of the surface, you will need ~150-200 g of UNIGRUND or ~70 ml of ACRYLCOLOR and ~2.1 kg of ACRYLIC SMOOTH RENDER 1.0 or ~2.9 kg of ACRYLIC SMOOTH RENDER 1.5 or ~3.1 kg of ACRYLIC SMOOTH RENDER 2.0 or ~5.0 kg of ACRYLIC SMOOTH RENDER 2.5.