From a problem to a solution- EXTERIOR
Decorative renders
Decorative render is the most usual method of final treatment of façade surfaces. Suitable substrates include any fine plastered surfaces, unplastered concrete, fibre-cement and other façade boards and fine trowelled or smooth base coats of all kinds of contact façade thermal insulating systems. The only exception is the scratched thick-coat render, which adheres sufficiently enough only to rough wall substrates.
Evenly grained surface is typical of decorative spray renders. You can select among mineral and acrylic renders with graininess of 1.5 and 2.5 mm.
MINEROLJUBOLIT 1,5 in 2,5
Surface texture of rolled decorative renders can vary substantially and depends on the applied structuring tool. The most simple is structuring by foam painting rollers, rubber relief rollers, different kinds of trowels, spatulas, putty knives, but it is also possible to use other tools, enabling an evenly thick render coat to become more or less relief.
VALITVALIPLAST
Scratch decorative render is the only render in JUB’s selection of renders, which is placed among thick-coated renders, since it is applied in thickness of over 10 mm. By scratching the application when it is half-hardened, the top coat in thickness of a few mm is removed and an evenly rough surface typical of scratch renders is created.
MINERALNI STRUGAN OMET
Colour the pictures of interior and eksterior spaces with JUB colours and tekstures.
In the area "My JUB", registered users will be able to add their own projects and favourite links as well as to edit their user account.
