Decorative treatments of plinths

Uncracked ordinary fine renders and uncracked concrete

JUB offers the following solutions for at least a month-old lime-cement or cement plasters (including base coats of façade thermal insulating systems) or unplastered concrete surfaces, with no bigger defects, damages, and cracks visible with the naked eye:

Solution A
                                                                                                                        
painting with a classic acrylic façade paint ACRYLCOLOR (a less durable coating as with solutions B and C, but you can choose among a great number of colour shades; if you select JUKOL as a primer, you increase water repellence and durability of protection).

Clean the plinth surface off dust and loose particles first and then coat it with diluted ACRYL EMULSION first (ACRYL EMULSION: water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of ACRYLCOLOR twice (if necessary, dilute the paint with up to 10% of water).

To paint a of m² a plinth, you will need ~100 g of ACRYL EMULSION or ~100 ml of
JUKOL and  ~200 ml of ACRYLCOLOR

Solution B                                                                                                                         

painting with a silicone facade paint JUBOSIL F (colour film is extremely resistant to ageing – its water repellence abates very slowly, therefore, dust and other dirt attach to painted surfaces less and later)

Clean the plinth surface off dust and loose particles first and then coat it with diluted first JUBOSIL G (JUBOSIL G : water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of  JUBOSIL F twice (if necessary, dilute the paint with up to 10% of water).

To paint a of m² a plinth, you will need ~100 ml of JUBOSIL G or ~100 ml of JUKOL and  ~250 ml of JUBOSIL F.
  
Solution C                                                                                                                        

Painting with acrylic paint intended for concrete TAKRIL (colour film offers a quality protection for unplastered concrete plinths due to a high CO₂ diffusion-resistance number; if you select JUKOL as a primer, you increase water repellence and durability of protection).

Clean the plinth surface off dust and loose particles first and then coat it with diluted ACRYL EMULSION first (ACRYL EMULSION: water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of  TAKRIL twice (if necessary, dilute the paint with up to 10% of water).

To paint a of m² a plinth, you will need ~100 g of ACRYL EMULSION or ~100 ml of
JUKOL and  ~200 ml of TAKRIL.