Decorative or protective painting of plinth surfaces

JUB offers the following solutions for at least a month-old lime-cement or cement plasters (including base coats of façade thermal insulating systems) or unplastered concrete surfaces, with no bigger defects, damages, and cracks visible with the naked eye:

Solution A
                                                                                                                        
painting with a classic acrylic façade paint ACRYLCOLOR (a less durable coating as with solutions B and C, but you can choose among a great number of colour shades; if you select JUKOL as a primer, you increase water repellence and durability of protection).

Clean the plinth surface off dust and loose particles first and then coat it with diluted ACRYL EMULSION first (ACRYL EMULSION: water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of ACRYLCOLOR twice (if necessary, dilute the paint with up to 10% of water).

To paint a of m² a plinth, you will need ~100 g of ACRYL EMULSION or ~100 ml of
JUKOL and  ~200 ml of ACRYLCOLOR

Solution B                                                                                                                         

painting with a silicone facade paint JUBOSIL F (colour film is extremely resistant to ageing – its water repellence abates very slowly, therefore, dust and other dirt attach to painted surfaces less and later)

Clean the plinth surface off dust and loose particles first and then coat it with diluted first JUBOSIL G (JUBOSIL G : water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of  JUBOSIL F twice (if necessary, dilute the paint with up to 10% of water).

To paint a of m² a plinth, you will need ~100 ml of JUBOSIL G or ~100 ml of JUKOL and  ~250 ml of JUBOSIL F.
  
Solution C                                                                                                                        

Painting with acrylic paint intended for concrete TAKRIL (colour film offers a quality protection for unplastered concrete plinths due to a high CO₂ diffusion-resistance number; if you select JUKOL as a primer, you increase water repellence and durability of protection).

Clean the plinth surface off dust and loose particles first and then coat it with diluted ACRYL EMULSION first (ACRYL EMULSION: water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of  TAKRIL twice (if necessary, dilute the paint with up to 10% of water).

To paint a of m² a plinth, you will need ~100 g of ACRYL EMULSION or ~100 ml of
JUKOL and  ~200 ml of TAKRIL.

JUB offers the following solutions for at least a month-old lime-cement or cement plasters (including base coats of façade thermal insulating systems) or unplastered concrete surfaces, with no bigger defects and damages, but with hair cracks:

Solution A

Apply a micro-reinforced acrylic façade paint REVITALCOLOR AG, which ensures high water repellence – especially in combination with JUKOL as a primer – and high protection against infection with wall algae and mould to painted surfaces. Paint attaches to the surface with adhesion, it is simple to apply – also in less favourable working conditions and you can select among a wide range of colour shades.  

Clean the plinth surface off dust and loose particles first and then coat it with diluted ACRYL EMULSION first (ACRYL EMULSION: water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of
REVITALCOLOR AG twice.

To paint a of m² a plinth, you will need ~150 g of ACRYL EMULSION or ~150 ml of
JUKOL and  ~300 – 400 ml of REVITALCOLOR AG.

Solution B                                                                                                                               

You can also apply a micro-reinforced silicone façade paint REVITALCOLOR SILICONE, which is similar to REVITALCOLOR AG. Painted surfaces are extremely resistant to ageing - water repellence abates very slowly - therefore, dust and other dirt attach to them less and later.

Clean the plinth surface off dust and loose particles first and then coat it with diluted JUBOSIL G first (JUBOSIL G : water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of REVITALCOLOR SILICONE twice.

To paint a of m² a plinth, you will need ~150ml of JUBOSIL G or ~150 ml of JUKOL and ~300 - 400 ml of REVITALCOLOR SILICONE.

A solution for at least a week-old water-repellent fine lime-cement render (e.g. FINE RENDER 1.0), which is applied onto the system of renovation renders having no bigger defects, damages and cracks visible with the naked eye, is painting with a highly water-vapour permeable and highly water repellent silicone facade paint JUBOSIL F (the colour film is extremely resistant to ageing – its water repellence abates very slowly, therefore, dust and other dirt attach to painted surfaces less and later).

Clean the plinth surface off dust and loose particles first and then coat it with diluted JUBOSIL G first (JUBOSIL G : water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of JUBOSIL F twice (if necessary, dilute the paint with up to 10% of water).

To paint a of m² a plinth, you will need ~100 ml of JUBOSIL G or ~100 ml of JUKOL and ~250 ml of JUBOSIL F.

The following solutions are suitable for at least a week-old water-repellent fine lime-cement render (e.g. FINE RENDER 1.0), which is applied onto the system of renovation renders, which has no bigger defects and damages, but is hair-cracked:

solution A          
                                                                                                                  
Apply a sufficiently water-vapour permeable, micro-reinforced acrylic façade paint REVITALCOLOR AG, which ensures high water repellence – especially in combination with JUKOL as a primer – and high protection against infection with wall algae and mildew to painted surfaces. Paint attaches to the surface with adhesion, it is simple to apply – also in less favourable working conditions and you can select among a wide range of colour shades.   

Clean the plinth surface off dust and loose particles first and then coat it with diluted ACRYL EMULSION first (ACRYL EMULSION: water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of REVITALCOLOR AG twice.

To paint a of m² a plinth, you will need ~150 g of ACRYL EMULSION or ~150 ml of
JUKOL and  ~300 – 400 ml of  REVITALCOLOR AG.

Solution B    
                                                                           
You can also apply a micro-reinforced silicone façade paint REVITALCOLOR SILICONE, which is similar to REVITALCOLOR AG. Painted surfaces are extremely resistant to ageing - water repellence abates very slowly - therefore, dust and other dirt attach to them less and later.

 Clean the plinth surface off dust and loose particles first and then coat it with diluted JUBOSIL G first (JUBOSIL G : water = 1 : 1) or diluted JUKOL (JUKOL: water = 1 : 1), then, apply the selected colour shade of REVITALCOLOR SILICONE twice.

To paint a of m² a plinth, you will need ~150ml of JUBOSIL G or ~150 ml of JUKOL and  ~300 - 400 ml of REVITALCOLOR SILICONE.